Licensed & Insured · CGC1533024 · CCC1334177
- Financing Available
- 24 Hours Open
Licensed & Insured · CGC1533024 · CCC1334177
Metal Roofing · Sarasota, FL
Standing-seam metal for Sarasota homes, from the barrier islands to the neighborhoods east of I-75. It handles wind and heat better than shingle, typically outlasts it by a wide margin, and can earn strong wind mitigation credit with many carriers.
Factory-certified installer of the systems insurers recognize
The Strongest Material for the Strongest Wind
Hurricane Milton made landfall at Siesta Key in October 2024, and for many Sarasota homeowners it turned a someday upgrade into a this-year decision. Roofs that came through with lifted shingles and wet underlayment are now coming up for replacement, and metal is a system many of those owners are pricing.
Standing-seam panels are held with concealed clips and continuous seams, so there are no exposed fasteners for wind to work loose. Properly installed, metal also reflects more heat than dark shingle, which keeps attic temperatures down through a Sarasota County summer.
Metal costs more up front than shingle. Whether it pays back depends on how long you plan to stay, what your carrier credits for it, and the condition of the deck underneath, which is exactly what our inspection measures.
What Standing-Seam Metal Offers
Is It Time?
Metal is often the right upgrade when one of these applies to your Sarasota roof. Here is how to tell.
Especially if your insurer has flagged it for renewal or non-renewal.
Metal's higher upfront cost is offset by decades of lower maintenance for owners who are not moving soon.
If your roof keeps losing material in storms, metal's wind rating solves that directly.
Many communities have updated aesthetic guidelines as metal has grown more common.
Some carriers specifically favor Class 4 impact-rated metal at renewal.
Not sure if metal fits your situation? A free inspection gives you a straight comparison against your current roof.
What we actually do
Every Sarasota metal job starts with a full tear-off so we can see the deck. Damaged sheathing is replaced, the deck is renailed to current code, and a high-temperature underlayment goes down before any panel does.
Permits come from the City of Sarasota for homes inside city limits and from Sarasota County for unincorporated areas, including Siesta Key. We pull the permit before work starts and schedule the required inspections.
When the roof is finished, you receive the documentation your carrier needs for a wind mitigation inspection, including the roof covering and how it is attached.
Every Metal Installation Includes
What We Check
Every Sarasota metal consultation answers the three questions that decide whether metal is the right call for your home.
It costs more upfront. Whether that pays back depends on how long you plan to stay.
Standing-seam metal typically earns stronger wind-mitigation credit than shingle. We document it and file it.
Sarasota projects are booked in dedicated blocks, not squeezed between local jobs.
Why Sarasota Homeowners Choose Metal, and Choose Us
Metal only performs to its rating when the clips, seams, and flashings are installed exactly as the manufacturer specifies. That detail work is where contractors differ, and it is what a wind mitigation inspector looks at afterward.
Sarasota is the northern end of our service area, so we book projects here in dedicated blocks, which keeps one crew on your roof from tear-off to final inspection.
thing you should know before
Serving Since
Fort Myers, Southwest Florida
Meet the team
"Florida sun, salt air, and 130 mph gusts will find any shortcut you took on a roof. We do not take shortcuts. That is the whole job."
Owner | Florida Roofing and Gutters | Licensed CGC1533024 | CCC1334177
Based in Fort Myers, our team has protected Southwest Florida homes and businesses for nearly 20 years.
Locally owned, locally trusted
From our base in Fort Myers, we serve communities across Southwest Florida. Find your city to get started.
How it works
A free inspection tells you whether metal is the right upgrade for your Sarasota property.
01
A free 12-point inspection of your current roof, with an honest comparison against tile and shingle.
02
A clear quote for your standing-seam metal system, with financing if you want to spread the cost.
03
Our certified crew removes the old roof, inspects and repairs the deck, and installs your metal system to code.
04
A final inspection, full cleanup, and the wind-mitigation paperwork filed for your insurer.
Beat the renewal cycle
Hurricane season ends November 30. The months after it are the best window to plan a metal re-roof before the next season begins.
Yes, we serve Sarasota County directly. We schedule Sarasota projects in dedicated blocks with the same factory-certified crew standard as our Fort Myers work.
Milton did not change the building code, but it showed which roofs held. Many owners whose shingle roofs were damaged are now comparing standing-seam metal, which has no exposed fasteners and is rated for high wind.
It can. Standing-seam metal typically earns stronger wind-mitigation credit than shingle, though the exact amount depends on your carrier and property.
The City of Sarasota for homes inside city limits, and Sarasota County for unincorporated areas such as Siesta Key. We pull the permit and schedule the inspections.
Many will, but rules vary by community. We can help you understand the difference between HOA aesthetic rules and current Florida Building Code.
Ready to get started?
Tell us a little about your roof and we will be in touch to schedule your inspection, or call us now at 239-966-7663.
Licensed CGC1533024 and CCC1334177 · Locally owned and operated · Nearly 20 years in Southwest Florida
